|
|
|
Command Arms Accessories for AR15 Rifles |
|
Command Arms Accessories,
previous known as Fobus and First Samco is
your
AR-15 Accessory Headquarters. With decades of experience
designing homeland defense products for the Israeli military, First Samco
and Fobus has expanded
their product line. In today's world, First Samco products have
become very important to Civilian, Law Enforcement, and Military groups
all over the world. Their recent focus has been on the development of an
innovative mounting system for the M16 - AR15 along with popular
accessories to compliment the M-33 &M-44 Handguard
|
M-33
$74.95 |
Built to military specification,
the M-33 will fit all M-16/AR15 style carbine rifles. Produced from
special high density polymers injected into ultra precision molds,
with rails molded directly into the handguards top and bottom
halves. The rails will accept any accessory with a Picatinny or
weight added to the handguards. Lasers, lights, optics, bi-pods, and
other mission specific accessories can be easily mounted on the
rails. A sliding cover is provided to protect the rails when not in
use and enhance the operator's grip upon the handguards. The use of
a stainless steel heat shield within the M-33 handguard acts as a
heat sink to dissipate the high temperatures encountered during
sustained rapid fire sequences. Fits 16" M4
Style AR15 Rifles |
M-44S
(16")
M-44L
(20")
$104.00 |
Built to military specifications
for the M16/AR15. The M44 incorporates 4 mounting rails allow the
use of any accessory with a Picatinny or Weaver® base, including
lasers, lights, optics and bi-pods. The operator will not notice
additional bulk or weight as the rails are designed to be an
integral part of the handguard. Thermal rubber rail covers enhance
the operator’s grip and protect the rails when not in use. A metal
heat shield dissipates the high temperatures produced during
sustained rapid fire sequences. The carbine length (M44S) is
currently available. No tools or gunsmithing required for
installation. M-44S Fits the 16"
Barreled AR's and the M-44L fits the 20" barreled AR15s. |
|
G-27
$21.95 |
The First Samco Tactical Hand Grip
is sure to increase the performance of your rifle or carbine. Made
from their own proven synthetic materials, it incorporates finger
swells and a backstrap that is designed with surfacing to enhance
your grip and minmize the chance of slippage should the G-27 become
wet. The integral extended beavertail
provides better control during firing sequences as it allows a
higher and firmer hold upon the G-27, while protecting the web of
your hand . Also, the supplied insert securely seals the uniquely
designed bottom of the Tactical Pistol Grip to allow a readily
accessible storage area. The Tactical G-27 is designed to be
ambidextrious and installs quickly. The Grip carries the First Samco
/ Fobus Lifetime Replacement Guarantee. |
|
VG-1
$39.95 |
The First Samco Vertical Grip was
developed to fit handguards equipped with a Weaver or Picatinny rail
system. Use of the VERTICAL GRIP will allow a natural "fighting
stance" hold on your rifle. By positioning your hands with one on
the pistol grip and the other on the VERTICAL GRIP, improvement in
both the reaction time needed to get "on target" and muzzle control
during rapid fire will be noticed. The VERTICAL GRIP may be
positioned, and held firmly, on the rail by simply pressing the lock
button and sliding the GRIP to the intended location and then
releasing. No tools or gunsmithing required for installation. |
|
M16MC
$11.95 |
The First Samco Mag Coupler joins
two magazines for the .223 M16/AR15 for greater ammunition capacity.
It holds the magazines with rock like strength and will not scratch
or deform mags. These are standard issue for the Israeli Military
and can be used in either a parallel or staggered position.
Lightweight and fiberglass reinforced with the Fobus / First Samco
Lifetime Warranty! |
|
FBS-Bipod
$27.95 |
Developed to fit handguards
equipped with a Weaver or Picatinny rail system. Use of this
MOUNT allows the attachment of a bipod, or any other piece of
equipment, requiring a mounting stud. The MOUNT may be
positioned, and held firmly, on the rail by simply pressing the lock
button and sliding the MOUNT to the intended location and then
releasing. No tools or gunsmithing is required and quick removal to
allow installation of another rail mounted accessory is easily
accomplished. |
|
FAS2
$26.95 |
Fobus USA, First Samco Tactical
Accessories for Flashlight Mount Surefire 6P for Picatinny and
Weaver Rail Systems.
|
|
|
|
|
|
|
| |
| |
|
