Our replacement Remote Pressure switch eliminates needing to reach for the on/off switch during the critical moment of Target Acquisition. It is a simple installation: Unscrew the factory Battery Cap and screw on the our replacement cap - Plug in the Remote Pressure Switch to the replacement Cap - Presuming you have your optic mounted, you are now ready to go shooting.

In the past when a professional operator wanted an Illuminated Optic with a momentary pressure switch. They were at the mercy of the very few products offering dedicated pressure switches.

Now we are honored to be offering a Remote Optic Pressure Switch that can fit most Red Dot Sights, Illuminated Scopes and Laser Sights that utilize a Battery Cap in either a 1.012" to 1.022" or  the larger 1.090" to 1.100" OD threads. The easy way to determine which Remote Switch will work for you is to see if a Quarter will fit inside the Battery cap. If it will fit you need the A1Sl (Large) , if not you need the A1SS (Small) replacement cap Remote Pressure Switch

Utilizing our "Optic Remote Pressure Switch" it will allow the operator to leave their Illuminated Optic in the "On" position at their favorite setting without fear of the battery running down. Once the operator wants to shoot - Simply Point, Apply and Hold Pressure Switch, Sight Target and Shoot. The manufacturer has chosen only the highest quality Military Grade Aluminum and components in producing the A1 SS and A1SL Replacement Battery Cap Remote Pressure switches.

If you are ordering a new NcStar optic with the Remote Pressure Switch we will make sure that the correct Switch will be sent with your Optic.